Q5 Quattro V6-3.2L (CALB) (2009)
Suspension Control Module: Service and Repair
Front Suspension
Electronic Damping Control Module
Removing
The Electronic Damping Control Module (J250) is located behind the right luggage compartment side trim.
-
Switch off all electrical consumers.
-
Remove ignition key.
-
Remove cover from the right luggage compartment storage compartment.
-
Remove Towing Recognition Control Module (J345 ) - 1 - from the control module bracket - 2 -, where applicable.
-
Remove nuts - arrows -, pull the control module bracket - 2 - off the threaded pins and move it downward.
-
Open the clamps - A - and - B - and remove the Electronic Damping Control Module (J250) - 1 - from the control module bracket - 2 -.