Q5 Quattro V6-3.2L (CALB) (2009)
‹› Coat the transition between the windshield and cowl panel trim with some soapy water and carefully pull the cowl panel trim - 1 -
vertically out of the retainer on the windshield - B arrows - beginning at the edge of the window.
-
Remove the cowl panel trim - 1 - by carefully removing it from the retainer on the windshield - B arrows -.
-
Disconnect the electrical connector - 2 -.
-
Remove the drain channel - 3 - on the linkage - arrows A -.
-
Remove the bolts - 4, 5 and 6 -.
-
Rotate the wiper arm frame - 1 - with the linkage and wiper motor upward - arrow B - and pull it forward out of the plenum chamber.
Installing