Q5 Quattro V6-3.2L (CALB) (2009)
‹› Tightening specification. Refer to => [ Tightening Specification and Sequence ] See: Service and Repair/Windshield Washer System, Assembly
Overview
Install in reverse order of removal, observing the following:
-
Insert the wiper motor - A - with the wiper frame into the vehicle.
-
Tighten bolts. Refer to => [ Tightening Specification and Sequence ] See: Service and Repair/Windshield Washer System, Assembly Overview
-
Position the water drain channel - B - on the wiper motor.
-
Adjust wiper arms. Refer to => [ Windshield Wiper Arms, Adjusting ] See: Wiper Arm/Adjustments/Windshield Wiper Arms, Adjusting.