Q7 Quattro V6-3.6L (BHK) (2007)
Ambient Temperature Sensor / Switch HVAC: Service and Repair
Outside Air Temperature Sensor
Outside Air Temperature Sensor
Removing
-
Remove front bumper cover. Refer to => Bumper See: Body and Frame/Bumper
-
Disconnect the electrical connector - 2 -.
-
Carefully press the retaining clips together - arrow - and remove the outside air temperature sensor (G17) - item 1 - upward from the bracket.
Installing
Install in reverse order of removal, observing the following:
-
Install the front bumper cover. Refer to => Bumper See: Body and Frame/Bumper.