Q7 Quattro V6-3.6L (BHK) (2007)
Expansion Valve: Service and Repair
Front Expansion Valve
Front Expansion Valve
Removing
-
Discharge A/C refrigerant system
-
Remove plenum chamber cover
-
Remove right section of plenum chamber front wall - A - Refer to => Radiator Support See: Body and Frame/Lock Carrier.
‹› Right section of plenum chamber front wall - A - is secured to vehicle by bolts - C - and - D -. A seal - E - is installed between plenum chamber
front wall and vehicle body.
-
Remove bolts - A - (tightening torque 10 Nm).
-
Disconnect refrigerant lines - B - and - C -.
‹› Close all open lines and connections on expansion valve with suitable caps (avoid dirt and moisture from entering the system).
-
Remove bolts - 1 - (tightening torque 10 Nm).