Q7 Quattro V6-3.6L (BHK) (2007)
/Page-4419002.png)
-
Remove bolt - 2 - and nuts - 1 -.
-
Remove B+ line bracket and catalytic converters.
-
Remove heat shield on starter.
-
Remove protective caps.
-
Remove wires - 2 - and - 3 -.
-
Remove bolts - 1 - and - 4 - and remove starter.
Installing
Install in reverse order of removal, observing the following:
‹› When installing, install cable ties at same location.
-
Install catalytic converter bracket.
