RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
-
Guide hooks - 7 - into C-pillar trim slots.
-
After installing, slide D-pillar trim - 1 - with front edge beneath upper B-pillar trim and move door seal accurately over trim edges again.
-
Ensure that hooks of head-level airbag adapter and clip engage properly.
CAUTION!
Ensure trim is held securely.
2
Clamps (Qty. 3)
3
Bolt (Qty. 1)
‹› Belongs to upper A-pillar trim, holds A-pillar trim and D-pillar trim together
4
Roof Grab Handle Cover
5
Roof Grab Handle
6
Screws, (Qty. 2)
‹› Tightening specification 4 Nm
‹› Self-locking
‹› Replace after each disassembly
‹› Threaded holes for screws must always be cleaned (for example, with thread cutter)
7
Hook