RS 4 Quattro Cabriolet V8-4.2L (BNS) (2008)
Trim Panel: Service and Repair
Lower A-Pillar Trim
Lower A-pillar Trim
1 - Sill Panel Strip
2 - Clips (Qty. 3)
3 - Clip
4 - Lower A-pillar Trim Panel
‹› Removing
-
Unclip the door sill - 1 - at the clips - 2 - (Qty. 3).
-
Lift the door sill - 1 - at the front.
-
Unclip the lower A-pill trim - 4 - on the clip - 5 -.
-
Press the tab on the clip - 3 - and remove the lower A-pillar trim - 4 -.
‹› Installing
-
When installing, make sure the rubber door seal is clean and is pulled over the bottom of the A-pillar trim - 1 -.
-
Install the lower A-pillar trim - 1 - in reverse order of removal.