Audi Workshop Service and Repair Manuals > S5 Quattro Coupe V8-4.2L (CAUA) (2009) > Engine, Cooling and Exhaust | Engine | Timing Components | Timing Chain | Component Information | Service and Repair | Camshaft Timing Chains, Removing From Camshafts

Camshaft Timing Chains, Removing From Camshafts|Page 2129 > < Camshaft Timing Chains, Removing From Camshafts|Page 2127

Page 9

Turn crankshaft two rotations in the direction of engine rotation with the Counterhold Tool (T10172) with (T10172/7) until the crankshaft is back
at "TDC".

‹› If it is accidentally rotated beyond "TDC", rotate it back approximately 30° and set it to "TDC" again.

‹› The threaded holes - arrows - in the camshafts must face upward.

Camshaft Clamp (T40070) mounted on both cylinder heads and tightened to 25 Nm - arrows -.

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Chain / Service and Repair / Camshaft Timing Chains, Removing From Camshafts
Page 2128

Camshaft Timing Chains, Removing From Camshafts|Page 2129 > < Camshaft Timing Chains, Removing From Camshafts|Page 2127

Audi Workshop Service and Repair Manuals

S5 Quattro Coupe V8-4.2L (CAUA) (2009)

Engine, Cooling and Exhaust Engine Timing Components Timing Chain / Service and Repair / Camshaft Timing Chains, Removing From Camshafts Page 2128

Engine, Cooling and Exhaust Engine Timing Components Timing Chain / Service and Repair / Camshaft Timing Chains, Removing From Camshafts Page 2128

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Chain / Service and Repair / Camshaft Timing Chains, Removing From Camshafts
Page 2128

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Chain / Service and Repair / Camshaft Timing Chains, Removing From Camshafts
Page 2128