Audi Workshop Service and Repair Manuals > S5 Quattro Coupe V8-4.2L (CAUA) (2009) > Engine, Cooling and Exhaust | Engine | Timing Components | Timing Chain | Component Information | Service and Repair | Camshaft Timing Chains, Removing From Camshafts

Camshaft Timing Chains, Removing From Camshafts|Page 2130 > < Camshaft Timing Chains, Removing From Camshafts|Page 2128

Page 10

‹› The Camshaft Locating Tool (T40070) is correctly positioned when the holes for the cylinder head bolts remain free.

Install the Crankshaft Holder (3242) in the hole and tighten to 20 Nm.

‹› The Crankshaft Holder (3242) must engage in the locating hole of the crankshaft - 1 -, otherwise repeat the adjustment.

Remove camshaft locating pins on both cylinder heads.

Remove Crankshaft Holder (3242).

Install sealing plug - arrow - for the "TDC " marking in the upper section of the oil pan => [ Oil Pan Upper Section Assembly Overview ] See:
Engine Lubrication/Oil Pan/Service and Repair/Oil Pan Upper Section Assembly Overview.

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Chain / Service and Repair / Camshaft Timing Chains, Removing From Camshafts
Page 2129

Camshaft Timing Chains, Removing From Camshafts|Page 2130 > < Camshaft Timing Chains, Removing From Camshafts|Page 2128

Audi Workshop Service and Repair Manuals

S5 Quattro Coupe V8-4.2L (CAUA) (2009)

Engine, Cooling and Exhaust Engine Timing Components Timing Chain / Service and Repair / Camshaft Timing Chains, Removing From Camshafts Page 2129

Engine, Cooling and Exhaust Engine Timing Components Timing Chain / Service and Repair / Camshaft Timing Chains, Removing From Camshafts Page 2129

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Chain / Service and Repair / Camshaft Timing Chains, Removing From Camshafts
Page 2129

Engine, Cooling and Exhaust
Engine
Timing Components
Timing Chain / Service and Repair / Camshaft Timing Chains, Removing From Camshafts
Page 2129