S6 V8-4.2L (BBD) (2004)
![background image](/audi/s6/v8-4.2l_(bbd)/Page-5528001.png)
Instrument Cluster: Service and Repair
Re-Setting Service Interval Display After Service W/O VAS5051
Re-setting service interval display after service without VAS5051
WARNING!
For re-setting without VAS5051, service is automatically set to a fixed interval value.
The service message must be reset after a service has been performed.
Re-setting the Service Reminder Indicator (SRI) can be performed with the VAG1551 Scant tool in the "adaptation" function.
The SRI can also be reset via the following procedure:
-
Switch ignition off.
-
Press reset button For trip odometer display in instrument cluster and hold.
-
Switch ignition on with button pressed.
-
Release button.
The following appears in display after releasing trip recorder: "SERVICE IN ????MI" or "SERVICE!".
-
Hold adjustment button For clock in instrument cluster pressed, until the message is reset to "SERVICE IN ????MI" or "SERVICE!"
The display reads: "SERVICE IN 10000 MI".
-
Switch ignition off.
NOTE: For re-setting without VAS5051, service is automatically set to a fixed interval value (see table).
Channel 42 (minimum mileage performance)
10000 mi
Channel 43 (maximum mileage performance)
10000 mi
Channel 44 (maximum time interval until next service) 365 days
Channel 45 (oil quality)
1