S6 V8-4.2L (BBD) (2004)
/Page-1385001.png)
Wheel Fastener: Specifications
^
Position wheel on wheel hub and secure by hand with two opposing wheel bolts.
^
Screw in remaining wheel bolts by hand. They must screw in easily. Pay attention to exact centering.
^
Relieve load on wheel if necessary by slightly lifting and tightening two wheel bolts slightly by hand.
^
Screw in evenly all wheel bolts by hand.
^
Tighten wheel bolts crosswise to 50 Nm e.g. using a four-way socket wrench.
^
Lower vehicle onto ground and tighten all wheel bolts crosswise to the specified tightening torque.
Tightening torque 120 Nm
