3 Series E46 316i (M43TU) SAL
If necessary, apply preload to the tensioning device for the drive
belt on the pulley as far as possible and lock with special
tool 11 3 340.
Caution!
The tensioning device for the drive belt is under high spring
pressure.
Press special tool 11 3 340 in as far as possible.
Unfasten screws (1 and 2).
Remove the tensioning device for the drive belt.
RA Replacing alternator drive belt tensioner (M43 / M43TU)
BMW AG - TIS
19.01.2013 10:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
