3 Series E46 316i (M43TU) SAL
Caution!
Open-end wrench can slip off tensioning rail.
Slowly and carefully push back tensioning rail with open-end
wrench and remove strain from chain.
Remove chain wheel and chain from camshaft.
Remove oil line to camshaft lubrication.
Release bearing cap.
Remove camshaft.
Installation
Installation of camshaft is described separately from removal.
Assembly sequence differs between removal and installation.
RA Replacing camshaft (M43TU)
BMW AG - TIS
19.01.2013 10:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -