3 Series E46 320d (M47) TOUR
13 32 051
Replacing fuel filter (M47)
Turn off ignition.
Caution!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an alternator
malfunction.
Screw on cap (1).
Remove fuel filter.
Tightening torque,
refer to Technical Data 13 32 4AZ.
Installation:
Check fuel filter housing for contamination. If necessary, clean
and determine cause of contamination.
Before installing new fuel filter, draw off and dispose of fuel
from housing.
Installation:
To vent fuel filter:
Turn on ignition and leave on for approx. 1 minute. In this
period of time, the fuel pre-supply pump is activated and the
fuel filter is filled with fuel and vented.
RA Replacing fuel filter (M47)
BMW AG - TIS
12.02.2013 13:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -