bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Replacing Fuel Filter Unit (M47)|Page 783 > < 2 RA Replacing Fuel Filter (M47)
Page 1
background image

13 32 061

Replacing fuel filter unit (M47)

Turn off ignition.

Caution!

When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.

Cover alternator with suitable materials.

Failure to comply with this procedure may result in an alternator
malfunction.

Screw on cap (1).

Remove fuel filter.

Tightening torque,

refer to Technical Data 13 32 4AZ.

Draw off and dispose of fuel from fuel filter housing.

Caution!

Catch escaping fuel.

Press clamps and disconnect lines (1 to 4). Catch escaping fuel.

1. 

Fuel feed from fuel tank

2. 

Supply line to fuel cooler

3. 

Fuel return from injection pump

4. 

Fuel feed to injection pump

Installation:

Check sealing rings, replace if necessary. 

To simplify assembly operation, coat seals with acid-free
grease.

RA  Replacing fuel filter unit (M47)

BMW AG - TIS

12.02.2013  13:48

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Replacing Fuel Filter Unit (M47)|Page 783 > < 2 RA Replacing Fuel Filter (M47)