5 Series E34 525td (M51) TOUR
Remove drive belt tensioner,
refer to 11 28 020.
If necessary, unfasten bearing pin on timing case cover with
special tool 11 2 360.
Tightening torque,
refer to Technical Data 11 14 3AZ.
Unfasten timing case cover.
Installation:
Remember to fit hollow bush.
Installation:
Seals for timing-chain cover and oil pump can only be
obtained as a paired set.
When repairing timing-chain cover, detach seal at marked
points.
RA Removing and installing, sealing or replacing timing case cover at bottom (M51)
BMW AG - TIS
23.01.2013 06:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -