5 Series E34 525td (M51) TOUR
Rotate camshaft until valves on cylinder 6 are in TDC position.
(Cylinder 1 = working stroke).
Note:
Rotate camshaft using hex nut.
Secure camshaft with special tool 11 3 320.
Note:
The gauge - special tool 11 3 320 - should be used for
adjusting timing intervals on new chains or on chains with a
recorded mileage of less than 20 000 km (12 000 miles).
If chains with a mileage of less than 20 000 km (12 000 miles)
are to be reused, insert a shim (feeler gauge) of A = 4.5 mm.
RA Replacing camshaft (M51)
BMW AG - TIS
23.01.2013 06:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -