5 Series E34 525td (M51) TOUR
23 21 706
Replacing bearings on all gearshafts
(S5D 200G/ 250G)
Transmission removed.
Remove input and output shafts,
refer to 23 21 505.
Bearing of output shaft in rear case section:
Place rear case section on support 23 0 100 and lift with
assembly hoist 00 1 490.
Unscrew bolts.
If installed, remove oil deflector plate (1).
Remove retaining plate (2).
Remove output shaft bearing with special tool 23 1 340 and
handle 00 5 500 from the outside to the inside.
RA Replacing bearings on all gearshafts (S5D 200G/ 250G)
BMW AG - TIS
23.01.2013 07:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
