5 Series E34 525td (M51) TOUR
- a
0.20 mm
Thickness of shim (X)
3.90 mm
If C nominal is greater than C actual, "a" is subtracted from
thickness of shim (X).
Example II:
C
11.50 mm
e -
0.10 mm
C nominal
11.40 mm
Y measured on dial gage
2.20 mm
+ master disc thickness
9.50 mm
C actual
11.70 mm
C nominal
11.70 mm
RA Replacing bearing for input bevel gear (Type M) - final drive removed -
BMW AG - TIS
23.01.2013 07:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
