5 Series E34 525td (M51) TOUR
If necessary, replace shaft seal for input flange,
refer to 33 11 021
If necessary input bevel gear,
refer to 33 12 551
Install new limited slip differential with new bearings.
Use both bearings of same make. Note make.
Lubricate new bearings with approved final drive gear lube
thoroughly (refer to Fluids and Lubricants) and let them drip dry.
RA Replacing complete locking differential (Type M) - final drive removed -
BMW AG - TIS
23.01.2013 07:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
