5 Series E39 540i (M62) SAL
Tighten sprockets in the following order:
1.
Three on exhaust camshaft, left
2.
All screws on exhaust camshaft, right
3.
Three screws on inlet camshaft, left
4.
All screws on inlet camshaft, right
Tightening Torque,
refer to Technical Data 11 31 3AZ.
Remove special tools 11 2 444 / 443 / 441 / 445.
Remove special tools 11 2 444 / 443 / 442 / 446.
Remove special tool 11 2 300.
Turn over engine once.
Tighten down remaining three screws in exhaust and intake
camshafts on cylinder bank 5-8.
Tightening Torque,
refer to Technical Data 11 31 3AZ.
RA Removing and installing right cylinder head (M62 up to 9/98)
BMW AG - TIS
20.02.2013 11:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -