5 Series E39 M5 (S62) SAL
Cylinder bank 1 to 4:
Press and hold down toggle switch button 3 on special tool
12 6 050 .
At same time, rotate exhaust camshaft at hexagon drive against
direction of rotation as far as it will go.
Note:
Spline teeth in VANOS gear are engaged; and exhaust camshaft
cannot be rotated further.
Remove special tool 11 2 300 . Rotate crankshaft in direction of
rotation a further revolution up to overlap TDC position.
Cylinder bank 1 to 4:
Slacken six accessible bolts two turns.
Crank engine at central bolt in direction of rotation until 1st
cylinder is at TDC firing position. Secure vibration damper in
position with special tool 11 2 300 .
RA Removing and installing right cylinder head (S62)
BMW AG - TIS
21.02.2013 06:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -