5 Series E39 M5 (S62) SAL
Cylinder bank 1 to 4:
Slacken remaining six bolts two turns.
Cylinder bank 1 to 4:
Note:
The camshafts have an opening. The 1st bearing caps have a
locating bore.
Align camshaft opening to locating bore in bearing cap and secure
in position with special tool 11 7 120 .
Cylinder bank 1 to 4:
Release screws on VANOS adjustment unit.
Cylinder bank 1 to 4:
Carefully lever out VANOS adjustment unit at "intended" openings
with a screwdriver on left and right.
RA Removing and installing right cylinder head (S62)
BMW AG - TIS
21.02.2013 06:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -