7 Series E38 L7 (M73) SAL
Removal of side window:
Cover the area all round the side window with protective covers
(1).
Attach self-adhesive film (2), e.g. plastic sheet, to side window
(splinter protection).
Caution!
Wear protective goggles, sturdy gloves and sealed safety
boots (risk of injury).
Note:
During the next work step, a second person must be present
at the same time to vacuum up the glass splinters.
Carefully mark door window (1) with a hammer and peening tool
on edge of window (2) and cut through along adhesive bead (3).
Remove door window (1) and strips (2).
RA Removing and installing/replacing trim (side window) on door pillar (center door
BMW AG - TIS
22.02.2013 04:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
