X Series E70 X5 4.8i (N62TU) OFFRD
Release nuts of screws (1).
Remove screws (1); if necessary, lower/raise swivel bearing and
spring strut using workshop jack.
Remove control arm (2) from swivel bearing.
Installation:
Replace screws and nuts.
Tighten screw connection in normal position.
Tightening torque 31 12 5AZ
.
After installation:
•
Carry out ride-height-calibration
RA Removing and installing/replacing top left control arm
BMW AG - TIS
08.02.2013 02:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
