X Series E70 X5 4.8i (N62TU) OFFRD
31 12 003
Removing and installing / replacing top right
control arm
Warning!
Danger to life!
Mount securing fixture for vehicle on lifting platform to prevent
the vehicle from slipping off or tilting down.
Note:
Control arms with + or - marking (see illustration) are camber
correction arms:
-
Underdimension variant
+
Overdimension variant
These camber correction arms are used to correct the camber
values by 30 minutes. To be used only if the tolerance values are
exceeded or undershot!
An unmarked control arm is a standard part.
Necessary preliminary tasks:
•
Mount securing fixture for vehicle on lifting platform
•
Remove right partition wall for equipment compartment
•
Remove rear right wheel arch cover
Release bolts (1).
Remove auxiliary part (2).
Installation:
When installing, make wiring harness penetration (3) is in correct
position.
RA Removing and installing / replacing top right control arm
BMW AG - TIS
08.02.2013 02:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -