X Series E70 X5 4.8i (N62TU) OFFRD
31 12 138
Replacing rubber mounts on both tension
struts
Special tools required:
•
31 3 032
•
33 3 322
Necessary preliminary tasks:
•
Check wheel control joints of tension struts while installed,
replace tension struts if necessary
•
Remove tension struts
Using a press and special tools 33 3 322 and 31 3 032 ,
press rubber mount out of tension strut.
Note:
Special tool 33 3 322 must be exactly flush with rubber mount
bushing.
Installation:
Keep rubber mount and bushing in tension strut clean and free
from grease.
Align rubber mounts to each other using markings and press in.
The deviation (A) must not exceed
±
5
°
.
RA Replacing rubber mounts on both tension struts
BMW AG - TIS
08.02.2013 02:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -