X Series E70 X5 4.8i (N62TU) OFFRD
Slide a second special tool 36 1 091 / 36 1 092 on right next
to first special tool 36 1 091 / 36 1 092 between tyre bead and
rim flange.
Lever tyre bead over rim flange.
Remove first special tool 36 1 091 / 36 1 092 and slide on
right next to second special tool 36 1 091 / 36 1 092 between
tyre bead and rim flange and lever tyre bead over rim flange.
Continue this procedure in clockwise direction until tyre bead is
resting fully over rim flange.
Swivel or tilt fitting head into position and allow it to snap into
place.
Lever lower bead with tyre iron over mounting finger.
Run fitting machine forwards clockwise until tyre is completely
detached from rim.
Release lock and tilt or swivel fitting head back.
Unclamp and clean rim.
Replace valve.
Important!
Coat wheel drop center, rim shoulders and rim flange with tyre
mounting paste.
Coat lower tyre bead (1) on outside with plenty of tyre
mounting paste.
Coat upper tyre bead (2) on inside and outside with plenty of
tyre mounting paste.
RA Replacing a runflat tyre
BMW AG - TIS
08.02.2013 05:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -