Replacing Fluid Reservoir for Windscreen Washer on X5 48i
Remove high-pressure line (6) and if necessary air supply unit
vent line from fluid reservoir for windscreen washer unit.
Release screw (1).
Feed out fluid reservoir for windscreen washer unit (2) towards
front.
Installation:
•
Make sure fluid reservoir for windscreen washer unit (1) is
correctly seated in lug (2)
•
Replace strainers on washer pumps
•
Coat sealing rings of washer pumps with antiseize agent
•
Make sure hoses and wiring harnesses are correctly routed
•
Fill fluid reservoir
RA Replacing (removing and installing) fluid reservoir for windscreen washer unit
BMW AG - TIS
08.02.2013 14:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -