X Series E70 X5 4.8i (N62TU) OFFRD
61 71 100
Removing and installing/replacing
windscreen washer pump
Necessary preliminary tasks:
•
Remove trim panel for cover on frame side member on right
•
Remove wheel arch trim at front right
•
Drain fluid reservoir for windscreen washer system
Release bolts.
Press off side panel slightly.
Note:
Side panel shown removed for purposes of clarity.
Disconnect plug connection (1).
Pull windscreen washer pump (2) in direction of arrow out of fluid
reservoir for windscreen washer system.
Disconnect hose plug connection (3) from windscreen washer
pump (2).
Installation:
Coat sealing ring (4) of windscreen washer pump (2) with
antiseize agent.
Ensure hose is laid without kinks.
RA Removing and installing/replacing windscreen washer pump
BMW AG - TIS
08.02.2013 14:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -