Riviera V6-231 3.8L VIN C SFI (1989)
A.
Clean windshield with general glass cleaner.
B.
Apply clear primer glass prep No. 1 to entire perimeter of glass edge inboard (approximately 12 mm). Wipe primer off with a clean, dry
cloth.
C.
Apply black glass prep No. 2 primer directly over clear primer area.
NOTICE:
Two kits will be required per vehicle.
10.
On Electras and LeSabres apply insulation strip, Part Number 25540623, along lower inboard edge of glass so as to allow 12-15 mm of glass
clearance from edge of glass to bottom edge of insulation strip. Refer to Fioure 3.
On Rivieras apply insulation strip, Part Number 20375201, along lower inboard edge of glass so as to allow 32-34 mm of glass clearance from
edge of glass to bottom edge of insulation strip. Refer to Figure 3.
Parts are currently available from GMSPO.
