Catera V6-3.0L VIN R (1997)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Replacement (Front)
REMOVAL PROCEDURE
1. Raise and support the vehicle.
2. Remove the bolt/screw (2) from the steering knuckle (1).
3. Remove the wheel speed sensor (3) from the steering knuckle (1).
4. Remove the cable (3) for the wheel speed sensor from the clips on the spring strut and the wheel housing.
5. Remove the wheel speed connector (1) from the wiring harness connector (2).
6. Remove the wheel speed sensor from the vehicle.
INSPECTION PROCEDURE
-
Inspect for the following on the sensor face:
-
Inspect for an accumulation of metallic particles.