Catera V6-3.0L VIN R (1997)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Replacement (Rear)
REMOVAL PROCEDURE
1. Raise and support the vehicle.
2. Remove the bolt/screw (2) from the differential housing (3).
3. Remove the wheel speed sensor (1) from the differential housing (3).
4. Remove the wiring harness/wheel speed connector from the clip on the vehicle under-body.
5. Remove the wheel speed connector (2) from the wiring harness connector.
6. Remove the wheel speed sensor (1) from the vehicle.
INSPECTION PROCEDURE
-
Inspect for the following on the sensor face:
-
Inspect for an accumulation of metallic particles.