CTS V6-2.8L (2006)
1. Install the power steering reservoir.
2. Install the power steering reservoir bolts.
^
Tighten the upper bolts to 9 Nm (80 inch lbs.).
^
Tighten the lower bolt to 25 Nm (19 ft. lbs.).
3. Install the power steering reservoir outlet hose to the power steering reservoir.
4. Install the power steering cooler hose to the power steering reservoir.
5. Remove the drain pan from under the vehicle.
6. Install the air cleaner intake duct.
7. Bleed the power steering system.
8. Install the front air deflector.
