CTS V6-3.2L VIN N (2003)
Tighten the nuts (1) to 6 Nm (53 lb in).
5. Position the fascia to the horizontal joint at the quarter panel (4).
6. Install the bolts (3) in order to secure the fascia to the quarter panel (4).
Tighten the bolts to 3 Nm(27 lb in).
7. Install new push-in retainers (2) to secure the fascia to the floorpan.
8. Install the sill plate. Refer toCompartment Sill Plate Replacement - Rear (See: Interior Moulding / Trim/Scuff Plate/Service and Repair) in Body
Rear End.
9. Install the rear fascia extension. Refer toFascia Extension Replacement - Rear (See: Fascia Extension Replacement - Rear) .
10. Close the rear compartment.
