CTS V6-3.2L VIN N (2003)
5. Connect the door handle rod to the latch.
1. Insert the rod (1) into the clip (2) on the door latch assembly.
2. Close the clip.
6. Inspect for proper operation of the door handle and lock cylinder.
7. Install the theft shield into the door, if equipped.
8. Install the theft shield retainer (1) into the hole in the door handle.
9. Install the theft shield screws (2).
Tighten the screws (2) to 7 Nm (62 lb in).
10. Install the water deflector. Refer to Water Deflector Replacement - Front Door. See: Front Door Panel/Service and Repair/Water Deflector
Replacement - Front Door
11. Install the door trim panel. Refer to Trim Panel Replacement - Side Front Door (See: Front Door Panel/Service and Repair) .
