CTS V6-3.2L VIN N (2003)
Front Door Weatherstrip: Service and Repair
Weatherstrip Replacement - Front Door Upper Auxiliary
Weatherstrip Replacement - Front Door Upper Auxiliary
Removal Procedure
1. Lower the window to the full down position.
2. Remove the power mirror. Refer toMirror Replacement - Power (See: Mirrors/Service and Repair/Mirror Replacement - Power Mirror) .
3. Remove the window outer belt sealing strip. Refer toSealing Strip Replacement - Front Door Window Belt Outer (See: Front Door Window
Glass/Front Door Window Glass Weatherstrip/Service and Repair/Door Window Sealing Strip/Front Side Door Window Belt Inner Sealing Strip
Replacement) .
4. Remove the screws (1, 3) from the front door upper auxiliary molding.
5. Remove the push-in fastener (2).
6. Remove the upper auxiliary molding.
Installation Procedure
1. Install the front door upper auxiliary molding onto the door frame.
2. Install the upper, rear, corner screw (3).
3. Install the push-in fastener (2) to the door.
Notice: Refer toFastener Notice in Cautions and Notices.
4. Install the screws (1).
Tighten the screws (1, 3) starting at the rear and working forward to 2 Nm (18 lb in).
5. Install the outer belt sealing strip. Refer toSealing Strip Replacement - Front Door Window Belt Outer (See: Front Door Window Glass/Front
Door Window Glass Weatherstrip/Service and Repair/Door Window Sealing Strip/Front Side Door Window Belt Inner Sealing Strip Replacement
) .
6. Install the power mirror. Refer toMirror Replacement - Power (See: Mirrors/Service and Repair/Mirror Replacement - Power Mirror) .