CTS V6-3.2L VIN N (2003)
Notice: Refer to Fastener Notice in Service Precaution.
2. Install the power steering gear mounting bolts.
^
Tighten the bolts to 95 Nm (70 ft. lbs.).
3. Install the power steering pressure hose to the steering gear retaining bolt.
^
Tighten the bolt to 9 Nm (80 inch lbs.).
4. Install the stabilizer shaft.
Important: Install new seals on the power steering pressure and return hoses.
5. Install the power steering gear pressure and return hoses to the power steering gear.
^
Tighten the hoses to 30 Nm (22 ft. lbs.).
