CTS V6-3.2L VIN N (2003)
6. If equipped, connect the variable effort steering electrical connector (1).
7. Install the outer tie rod end to the steering knuckles.
8. Install the outer tie rods nut.
^
Tighten the nuts to 70 Nm (52 ft. lbs.).
9. Connect the intermediate shaft to the power steering gear.
10. Install the intermediate shaft lower pinch bolt.
^
Tighten the bolt to 47 Nm (35 ft. lbs.).
11. Install the front air deflector.
12. Install the tire and wheels.
13. Lower the vehicle.
