CTS V6-3.2L VIN N (2003)
Shifter M/T: Service and Repair
Shift Control Assembly Replacement
Shift Control Assembly Replacement
Removal Procedure
1. Remove the shift control knob/closeout boot.
2. Remove the sound insulator foam block from the console.
3. Remove the 2 bolts attaching the shift control assembly to the shift control adaptor plate.
4. Remove the exhaust system.
5. Disconnect the propeller shaft coupler (1) from the transmission flange.
6. Push the front propeller shaft toward the rear of the vehicle in order to release the propeller shaft coupler (1) from the transmission flange.
7. Support the transmission with a suitable transmission jack.