CTS V6-3.2L VIN N (2003)
8. Remove the bolts securing the transmission support to the vehicle body. It is not necessary to remove the transmission support from the
transmission mount.
9. Remove the shift control rod pin and reaction arm pin retaining clips (1).
10. Lower the rear of the transmission only enough to allow removal of the shift control rod pin and reaction arm pin.
11. Remove the reaction arm retaining pin (5) and disconnect the reaction arm (4) from the transmission.
12. Remove the shift control rod pin (3) and disconnect the shift control rod (2) from the transmission.
13. Unclip the shift control assembly from the shift control adaptor plate and remove the shift control assembly from the vehicle.
Installation Procedure
1. Install the shift control assembly to the vehicle and clip the shift control assembly into the shift control adaptor plate.
