CTS V8-5.7L VIN P (2004)
Front Door Hinge: Service and Repair
Front Side Door Hinge Replacement
Removal Procedure
Important: Replace only one hinge at a time then repeat procedure for the second hinge, if needed.
1. Remove the push-in fasteners securing the fender sound insulator to the front fender.
2. Remove the fender sound insulator.
3. Mark the position of the hinge on the body.
4. Support the door.
5. Remove the hinge bolts (1) from the body.
6. Remove the hinge bolts from the door.
Installation Procedure
1. Align the hinge to the marks made on the body during removal.
Notice: Refer toFastener Notice in Cautions and Notices.
2. Install the hinge to body bolts (1).
Tighten the bolts to 25 Nm (18 lb ft).
3. Install the hinge to door bolts.