CTS V8-5.7L VIN P (2004)
6. Position the suction hose into the bracket.
NOTE: Refer to Fastener Notice in Service Precautions.
7. Install the screw (1) into the bracket.
Tighten
Tighten the screw to 1 N.m (9 lb in).
8. Connect the suction hose to the compressor.
9. Install the retaining bolt (1) to the compressor.
Tighten
Tighten the bolt to 9.8 N.m (87 lb in).
10. Install the air cleaner assembly.
11. Install the battery.
12. Evacuate and recharge the refrigerant system.
13. Leak test the fittings of the component using the J 39400-A.