CTS V8-5.7L VIN P (2004)
11. If you have a roof rail module, refer to the following instructions:
-
Place the J 39401-B SIR deployment fixture (3) in the center of the cleared area.
-
Fill the deployment fixture with water or sand.
-
Using the proper nuts (2) and mount the roof rail module (1) to the deployment fixture (3), with the vinyl face up.
-
Adjust and secure the fixture arms (4) to the deployment fixture (3).
-
Securely tighten all fasteners that hold the side impact module (1) to the deployment fixture (3).
12. Inspect the J 38826 and the appropriate pigtail adapter for damage. Replace as needed.
13. Short the 2 SIR deployment harness leads (1) together using one banana plug seated into the other.
IMPORTANT: Refer to Tools Required list for the correct adapter.
14. Connect the appropriate pigtail adapter (2) to the SIR deployment harness (1).
15. Extend the SIR deployment harness and adapter to full length from the deployment fixture.