CTS V8-5.7L VIN P (2004)
Stabilizer Link: Service and Repair
Rear Suspension
Stabilizer Shaft Link Replacement
Removal Procedure
1. Raise and support the vehicle.
2. Remove the tire and wheel.
3. Remove the stabilizer shaft link retaining nuts.
4. Remove the stabilizer shaft link from the stabilizer shaft.
5. Remove the stabilizer shaft link from the lower control arm.
Installation Procedure
1. Install the stabilizer shaft link to the lower control arm.
2. Install the stabilizer shaft link to the stabilizer shaft.
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the stabilizer shaft link retaining nuts.
Tighten the nuts to 50 Nm (37 ft. lbs.).
4. Install the tire and wheel.
5. Lower the vehicle.