CTS V8-5.7L VIN P (2004)
![background image](/cadillac/cts/v8-5.7l_vin_p/Page-2070001.png)
Front Subframe: Service and Repair
Front Frame Replacement
Tools Required
J 24319-B Steering Linkage and Tie Rod Puller
J 39580 Engine Support Stand
Removal Procedure
1. Install the engine support fixture. Refer toEngine Support Fixture in Engine Mechanical - 2.6L and 3.2L or toEngine Support Fixture in Engine
Mechanical - 5.7L.
2. Raise and support the vehicle. Refer toLifting and Jacking the Vehicle in General Information.
3. Remove the front wheels. Refer toTire and Wheel Removal and Installation in Tires and Wheels.
4. Remove the front air deflector. Refer toFront Air Deflector Replacement (See: Body and Frame/Spoilers, Flaps, and Air Dams/Air Dam/Service
and Repair) in Body Front End.
5. Disconnect the electrical harness retainers (1) securing the engine harness to the frame.
6. Disconnect the left rearward retainer (1).
7. Disconnect the right rearward retainer (1).