CTS V8-5.7L VIN P (2004)
3. With the aid of an assistant, position and secure the new frame assembly to the support fixture.
4. With the aid of an assistant, carefully lower the body to the frame.
5. Ensure the following components are clear from the frame.
*
The electrical harness
*
The steering knuckle assembly
*
The brake pipes
Notice: Refer toFastener Notice in Cautions and Notices.
6. Install the frame mountings bolts (2).
Tighten the bolts to 191 Nm (141 lb ft).
7. Raise the vehicle.
8. Install the engine mount lower retaining nuts (2).
Tighten the nuts to 50 Nm (37 lb ft).
9. Remove theJ 39580 from under the vehicle.