CTS V8-5.7L VIN P (2004)
Suspension Strut / Shock Absorber: Service and Repair
Rear Shock Absorber
Shock Absorber Replacement
Shock Absorber Replacement
Removal Procedure
1. Remove the rear seat back.
2. Move the sound insulator away from the shock tower.
3. Remove the upper shock mounting nuts.
4. Raise and support the vehicle.
5. Remove the lower shock mounting bolt.
6. Remove the shock from the vehicle.
Installation Procedure
1. Install the shock to the vehicle.
2. Install the lower shock mounting bolt.
Tighten the bolt to 150 Nm (111 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.