CTS RWD V6-3.6L (2008)
3. Install the PCV fresh air tube to the air inlet.
4. Install the PCV fresh air tube to the left camshaft cover.
5. Install the intake manifold insulator (2)
6. Install two intake manifold insulator retaining pins (1)
7. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (LP1, LY7) (See: Fuel Delivery and Air Induction/Fuel
Injector/Service and Repair/Fuel Injector Sight Shield Replacement (LY7) VIN 7 W/O Direct Fuel Injection)Fuel Injector Sight Shield
Replacement (LLT) (See: Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Fuel Injector Sight Shield Replacement (LLT) VIN V
W/ Direct Fuel Injection) .